Contoura 460 & 480 4 Section Electric Bed
Technical Specifications:
Overall Length: 221 cm (87″)
Extended Length: 239 cm (94″)
Overall Width: 103 cm (40.5″) with side rails
Height Adjustment Range: 40 cm to 80 cm (15.75″ – 31.5″)
Under-Bed Clearance: 150 mm (full length hoist access)
Castor Size: 125 mm single-wheel (150 mm options available)
Backrest Angle: Maximum 65°
Calf Section Elevation: Maximum 37°
Tilt Range (Electric Tilt): 0° to 17° Head-down (Trendelenburg) and 0° to 17° Foot-down (Reverse Trendelenburg)
Pro-Contour Mechanism: 5 simultaneous mattress platform movements to reduce tissue pressure and friction
Auto-Contour: One-button configuration for upright chair positioning
Contoura 460: 180 kg (396 lbs / 28 stone)
Contoura 480: 267 kg (587 lbs / 42 stone)
Power Input: 1.5A maximum at 230V a.c., 50/60 Hz
Shock Protection: Class 1, Type B
Liquid Ingress Protection: IP54 rating
Backup Battery System: 2 x 12V series connected, sealed, rechargeable lead/acid gel (1.2 amp-hours)
Related products
BAILIDA Emergency Crash Trolley
Overall Cart Dimensions
- Width (W): 690 mm (27-1/8")
- Depth (D): 518 mm (20-3/8")
- Total Height (H): 1085 mm (42-11/16")
- Height without Casters: 951 mm (37-7/16")
Drawer Specifications
All drawer variants feature a uniform width of 569 mm (22-3/8") and depth of 398 mm (15-11/16"). They are classified into three distinct heights:
- Item No. A: 76 mm (3") height
- Item No. B: 155 mm (6") height
- Item No. C: 234 mm (9") height
Features & Security
- Break-Away Lock: Provides instant-access security for emergency scenarios.
- Divider Kits: Specifically designed to organize 3" and 6" drawer variants.
- Design Standards: Developed using emergency room personnel feedback, fully compliant.
Accessory Equipment Options
The cart can be outfitted with the following standardized attachments:
- Height-adjustable IV Pole
- Dedicated Defibrillator Shelf
- Side-mounted Oxygen Tank Holder
- Rear-mounted CPR Cardiac Board
- Secure Sharps Container Set
- External Power Strip Holder
- Waste Container Set (with lid)
- Glove Dispenser, Bottle Holders, and Clear Top Mat
Blood Transfusion Chair 217-KH-00
Key Specifications
- Frame Material: Stainless steel construction.
- Height Adjustment: Foot-operated hydraulic pump system.
- Build Design: Two-sectional build with a cushioned seat.
- Portability: Folding legs, seat, and backrest sections.
- Comfort Layer: Top mattress is at least 25 mm thick.
- Medical Attachments: Removable, adjustable hand supports on both sides for blood transfusions.
- Mechanisms: Simultaneously adjustable backrest and seat sections.
Required Dimensions
- Back Rest: Minimum 30″ Length × 20″ Width.
- Seat: Minimum 42″ Length × 20″ Width.
- Adjustable Height: Minimum range of 23″ to 32″.
CARE VISION CV-2 Three function Electric ICU Bed
Core Motorized Functions
Backrest Adjustment: Upward angle up to 75°
Footrest Adjustment: Upward angle up to 45°
Height Adjustment: Motorized variable bed height
Structural Materials & Parts
Frame & Base: Integrated stamping frame and mattress base made of steel epoxy.
Head & Foot Boards: Detachable ABS boards.
Side Rails: Collapsible aluminium guardrails.
Mobility: 5" castors equipped with brakes.
Electrical Specifications
Input Voltage: Optional 220–240VAC (50Hz) or 110–120VAC (60Hz).
Output Voltage: 24VDC system.
Optional Upgrades & Accessories
Dedicated mattress.
Over-bed table.
Bedside cabinet.
Back-up battery system.
Emergency CPR control.
I.V. Rod & Drainage hook attachments.
Dialysis Chair 217-KO-00
Specification:
- A versatile 3-section chair.
- Back and leg section adjustable by independent electric motor
- Mobile on 75mm dia casters, with two lockable casters
- Trendelenburg by an independent electric motor
- Powder coated finish to mild steel parts
- Adjustable arm rests
- Easy cleanable mesh platform with removable mattress.
- Adjustable foot rest
- Adjustable pillow block can be used as lumber support also.
- High quality foam mattress with artificial leather cover
- Most sliding parts of stainless steel material.
- 220V 50 Hz operations.
- Safe low voltage hand controller
Hi-Lo Stretcher Trolley 412-K
Transcribed Specifications
- Mild Steel construction
- Height adjustment using acme screw crank
- Utility basket underneath
- Removable stretcher top with washable rexene cover and Velcro straps
- Removable pillow with stretcher top
- Stainless steel easy to use side guards
- All around bumper protection
- Mobile on 8" castors
- Cylinder holder
- IV Pole supplied
- Dimensions: 75" x 26" x 21–36" (L x W x H)
Hill-Rom Affinity III Birthing Bed
The Hill-Rom Affinity III (#P3700) is intended for use as a birthing bed within the acute care Labor and Delivery Unit. Includes a new 6" Hospital-Grade Memory Foam Mattress and available with optional calf supports. It is in excellent condition and refurbished to proper operating specifications.
It has multiple articulation features, ergonomic hand grips, and a steering control headboard. Three independent motors raise and lower the bed, foot section, and head section. Calf supports for this bed may be manually adjusted and will lock when in the upright position, and the foot section of this bed slides off and may be stowed until once again needed.
This bed is electrically operated using Nurse and Patient controls with option to lock out patient bed controls. The bed may be transported easily with featured Central Brake and Steer system with 2-wheel braking and 1-wheel steering, and built-in headboard handles make the bed easy to steer. If the bed is not near an outlet, battery backup will enable the user to adjust the bed as needed.
Hill-Rom VersaCare Hospital Patient Bed
Electric Patient Bed Multifunction -Versa care Hill-Rom USA- (Refurbished)
Key Features:
FlexAFoot: Foot platform extender that customizes the bed length up to 12" and helps patients from sliding down the bed.
LowChair: Allows the patient to be placed in an upright sitting position while keeping the bed low.
3-Level Bed Exit Alarm: Advanced sensitivity detects whether the patient is lying in bed, sitting on the edge of the bed, or is out of the bed.
VersaCare A.I.R. Surface (optional): A powered air surface designed for enhanced comfort with safeguards to assist in the prevention and treatment of pressure ulcers. By integrating an advanced weight-based pressure redistribution system with bed frame features, the VersaCare A.I.R. surface provides all the benefits you need to maintain your patient's skin integrity.
Three independent air zones continuously adjust pressure based on patient weight and head of bed articulation.
One-button turn assist and max inflate to help aid caregivers when repositioning patients.
Accommodates weight up to 500 lb.
P500 Therapy Surface (optional): State of the art. It not only addresses shear, friction, and pressure, but also keeps the patient cool and dry.
Helps to redistribute pressure, to prevent the formation of pressure ulcers.
Automatically adjusts to the patient's weight, size, movement, and the head-of-bed articulation.
Advanced Microclimate technology helps manage heat and moisture, keeping the patient's skin cool and dry and less susceptible to damage.
Aids in the prevention and treatment of Stage I-IV pressure ulcers.
IntelliDrive Powered Transport (optional): A powered system that lets staff handle the bed effortlessly. A single caregiver can easily maneuver and guide the bed.
Hill-Rom VersaCare Hospital Bed Operation Manual
Reviews
There are no reviews yet.