Hill-Rom Affinity III Birthing Bed
The Hill-Rom Affinity III (#P3700) is intended for use as a birthing bed within the acute care Labor and Delivery Unit. Includes a new 6″ Hospital-Grade Memory Foam Mattress and available with optional calf supports. It is in excellent condition and refurbished to proper operating specifications.
It has multiple articulation features, ergonomic hand grips, and a steering control headboard. Three independent motors raise and lower the bed, foot section, and head section. Calf supports for this bed may be manually adjusted and will lock when in the upright position, and the foot section of this bed slides off and may be stowed until once again needed.
This bed is electrically operated using Nurse and Patient controls with option to lock out patient bed controls. The bed may be transported easily with featured Central Brake and Steer system with 2-wheel braking and 1-wheel steering, and built-in headboard handles make the bed easy to steer. If the bed is not near an outlet, battery backup will enable the user to adjust the bed as needed.
Related products
BAILIDA Emergency Crash Trolley
Overall Cart Dimensions
- Width (W): 690 mm (27-1/8")
- Depth (D): 518 mm (20-3/8")
- Total Height (H): 1085 mm (42-11/16")
- Height without Casters: 951 mm (37-7/16")
Drawer Specifications
All drawer variants feature a uniform width of 569 mm (22-3/8") and depth of 398 mm (15-11/16"). They are classified into three distinct heights:
- Item No. A: 76 mm (3") height
- Item No. B: 155 mm (6") height
- Item No. C: 234 mm (9") height
Features & Security
- Break-Away Lock: Provides instant-access security for emergency scenarios.
- Divider Kits: Specifically designed to organize 3" and 6" drawer variants.
- Design Standards: Developed using emergency room personnel feedback, fully compliant.
Accessory Equipment Options
The cart can be outfitted with the following standardized attachments:
- Height-adjustable IV Pole
- Dedicated Defibrillator Shelf
- Side-mounted Oxygen Tank Holder
- Rear-mounted CPR Cardiac Board
- Secure Sharps Container Set
- External Power Strip Holder
- Waste Container Set (with lid)
- Glove Dispenser, Bottle Holders, and Clear Top Mat
Contoura 460 & 480 4 Section Electric Bed
Technical Specifications:
Overall Length: 221 cm (87")
Extended Length: 239 cm (94")
Overall Width: 103 cm (40.5") with side rails
Height Adjustment Range: 40 cm to 80 cm (15.75" – 31.5")
Under-Bed Clearance: 150 mm (full length hoist access)
Castor Size: 125 mm single-wheel (150 mm options available)
Backrest Angle: Maximum 65°
Calf Section Elevation: Maximum 37°
Tilt Range (Electric Tilt): 0° to 17° Head-down (Trendelenburg) and 0° to 17° Foot-down (Reverse Trendelenburg)
Pro-Contour Mechanism: 5 simultaneous mattress platform movements to reduce tissue pressure and friction
Auto-Contour: One-button configuration for upright chair positioning
Contoura 460: 180 kg (396 lbs / 28 stone)
Contoura 480: 267 kg (587 lbs / 42 stone)
Power Input: 1.5A maximum at 230V a.c., 50/60 Hz
Shock Protection: Class 1, Type B
Liquid Ingress Protection: IP54 rating
Backup Battery System: 2 x 12V series connected, sealed, rechargeable lead/acid gel (1.2 amp-hours)
Dialysis Chair 217-KO-00
Specification:
- A versatile 3-section chair.
- Back and leg section adjustable by independent electric motor
- Mobile on 75mm dia casters, with two lockable casters
- Trendelenburg by an independent electric motor
- Powder coated finish to mild steel parts
- Adjustable arm rests
- Easy cleanable mesh platform with removable mattress.
- Adjustable foot rest
- Adjustable pillow block can be used as lumber support also.
- High quality foam mattress with artificial leather cover
- Most sliding parts of stainless steel material.
- 220V 50 Hz operations.
- Safe low voltage hand controller
EDAN DUS-60 Digital Diagnostic Ultrasound Machine
Display and Interface Architecture
TFT-LCD Monitor: 12.1-inch screen displaying complete real-time clinical data.
Data Overlays: Tracks date, time, probe frequency, frame rate, depth, patient demographics, body marks, annotations, and measurements.
Control Center: Backlit panel featuring customizable user-defined keys to optimize workflow.
Imaging Parameters and Modalities
Scanning Modes: Supports B, 2B, 4B, B+M, M, and Pulsed Wave (PW) Doppler.
Gray Scale Capacity: 256 processing levels for smooth tonal transitions.
Depth and Angle Range: Dynamic scanning depths from 19 mm to 324 mm, with scanning angles up to 155 degrees.
Advanced Processing: Phase Inversion Harmonic Imaging (THI), Multi-Beam Technology, Dynamic Frequency Scanning, and Speckle Reduction.
Optimization Tools: 8-segment TGC sliders, one-touch smart IP keys, and multiple-pseudo-color imaging.
Clinical Functions and Diagnostic Software
Broad Applications: Abdomen, OB/GYN, small parts, musculoskeletal, cardiology, peripheral vascular, and urology.
Cine Loop Memory: 256-frame bidirectional cine-loop memory.
System Zoom: Real-time panoramic zoom and freeze magnification from x1.0 to x4.0.
Data Storage: Built-in 504MB standard flash storage paired with an internal large-capacity expansion archive.
Measurement Packages: Onboard packages for B-mode (distance, area, % stenosis, angle), M-mode (time, slope, heart rate), and Doppler tracks (velocity, acceleration, RI).
Physical Mechanics and Connectivity Interfaces
Transducer Ports: 2 standard ports featuring transducer auto-detection.
Transducer Spectrum: Accommodates 5-frequency transducers spanning 2.0 MHz to 10.0 MHz (convex, micro-convex, linear, endovaginal, and endorectal).
Peripheral Ports: Outfitted with 2 USB ports, 1 S-Video out, 1 Video out, 1 VGA out, 1 Ethernet port, 1 Remote control port, and 1 Footswitch port.
Power and Mobility: Universal 100V-240V power input with an integrated Lithium-ion battery providing up to 2 hours of continuous remote imaging.
Form Factor: Measures 330mm x 220mm x 320mm and weighs 7.1 kg (15.7 lbs).
F10 CTG Machine-Fetal Monitor
LE Medical F10- Fetal Monitor -CTG Machine
10″ Large touch Screen colorful Backlight LED display
Flexible , Light design , Easy operation, Folding Screen 60 degrees
Flip-Screen from 0 to 90 degree , Large Font , Multi interfaces display
FHR Range: 30 ~ 240bmp
Ultrasound Freq: 1.0Mhz ~ 3.0Mhz (Option)
Toco Range: 0 ~ 100%
60 hours CTG storage , reviewing , print ,
Silicon Key Board, Reviewing Print,
Simultaneously Maternal and Fetal Parameters display
High quality LEMO connector
Built-in Thermal Printer with 112mm Recording Paper
Monitoring of Single Fetus as standard (Optional Twins Monitoring)
Standard parameters:
FHR , TOCO , FM, Thermal Printer
Available with All Standard Accessories
Hi-Lo Stretcher Trolley 412-K
Transcribed Specifications
- Mild Steel construction
- Height adjustment using acme screw crank
- Utility basket underneath
- Removable stretcher top with washable rexene cover and Velcro straps
- Removable pillow with stretcher top
- Stainless steel easy to use side guards
- All around bumper protection
- Mobile on 8" castors
- Cylinder holder
- IV Pole supplied
- Dimensions: 75" x 26" x 21–36" (L x W x H)
Manual Vacuum Aspirator (MVA) Double Valve Medbar Turkey
- Includes O-Ring, Collar stop, 2 cc silicone oil.
- Adaptors included.
- Stable pressure level, each product is pressure controlled individually.
- Portability.
- 60 cc barrel capable of producing a vacuum of 609.6-660.4 mm/Hg.
- Safe and effective.
- Low Cost
- Appropriate for many different clinical settings.
- High patient and provider satisfaction.
- Outpatient procedure.
- Products of conception (POC) easily visible.
- Karman Cannula Injector Double Valve Set includes sterile Karman Cannula sizes 6, 7, 8, 9, 10 and 12.
- Shelf Life: 5 Years
Reviews
There are no reviews yet.