NeoBlu – B300 LED Phototherapy Light
Light Source & Spectral Output:
- Treatment Light: 16 super blue LED bulbs.
- Examination Light: 4 white LED bulbs.
- Wavelength Range: 400 to 550 nm.
- Peak Wavelength: 440 to 460 nm.
- Lamp Lifetime: 50,000 hours of operation.
- Safety Feature: Free from heat, UV, and IR emissions.
Irradiance Levels (Adjustable Intensity I, II, III)
- At 35 cm Distance: 63 µw/cm²/nm.
- At 40 cm Distance: 49 µw/cm²/nm.
- At 50 cm Distance: 36 µw/cm²/nm.
Control & Operations
- Screen Display: 3.5-inch LCD TFT touch screen.
- Display Features: Shows real-time clock and date.
- Treatment Timer: 0 to 999 hours total count.
- Down-Counter: 48-hour down-counter timer.
- Cooling Mechanism: Silent fanless cooling system.
- Acoustic Noise Level: Less than 30 dB.
Electrical & Environmental Requirements
- Supply Voltage: 220–240 VAC, 50/60 Hz (customizable).
- Operating Temperature: 10°C to 32°C.
- Operating Humidity: 5% to 99% RH (non-condensing).
- Storage Temperature: -10°C to +40°C.
- Storage Humidity: 0% to 90% RH.
Structural & Ergonomic Features
- Head Module: 360° rotatable design.
- Mobility Support: Height-adjustable rolling trolley stand.
- Ergonomics: Integrated comfortable handle.
- Utility Assets: Built-in storage accessory basket.
- Power Management: Custom power adapter holder.
Related products
Baby Warmer Model YDWIII
Infant Radiant Warmer Model YDWIII- Pak Made
- Adopted 02 Pcs Radiation Heater Tube Rods as the Radiator Heater
- Two Steps of Temperature are available by Two Switches
- Radiation Head can be adjusting in horizon 360 degree
- Stand Pole can be adjusted up and Down freely
- Adjustable Height for any Baby Cot Type
- The cart Mobile stand with four Truckles, can be locked
NeoComfort – NC9 Infant Radiant Warmer
Technical Specifications:
Power Requirements: Customer specified.
Heater Capacity: 500W.
Output Setting Range: 0% to 100% (5% increments).
Output Indication Range: 0% to 100% (1% increments)
Control Modes: Servo (Baby), Manual, Preheating.
Skin Temperature Setting: 34.0°C to 38.0°C.
Skin Temperature Display: 20.0°C to 42.0°C.
Skin Temperature Accuracy: ±0.3°C.
LCD Display: 10.4-inch touch screen (800x600).
Examination Lighting: 6W LED (three 2W bulbs).
Illumination Adjustment: 0 to 1500 lux.
Alarm Silence: Hands-free sensor control.
Timer Functionality: Switchable APGAR/CPR modes (beeps at 1, 3, 5, 10 min).
SpO2 Display Range: 1% to 100%.
SpO2 Accuracy: ±2% (within 70% to 99% range).
Pulse Rate Display: 30 to 240 bpm.
Pulse Rate Accuracy: 1% + 1 bpm.
NeoComfort NC3 Neonatal Baby Incubator
Technical Specifications:
1. Thermal Management & Airflow Control
• Control Loops: Dual-mode Microprocessor PID Air Mode and Skin Mode servo-controls.
• Air & Skin Override: Air expands from 37°C up to 39°C | Skin expands from 37°C up to 38°C.
• Heating Performance: Dual symmetrical heaters reaching target temperatures in < 25 minutes.
• Thermal Stability: Ultra-tight temperature variance restricted to < 0.3°C.
• Convective Safety: Internal mattress airflow restricted to < 10 cm/sec to prevent baby heat loss.
• Insulation: Double-walled hood structure paired with an Automatic Air Curtain during panel openings.
2. Humidity & Oxygen Control Subsystems
• Closed Servo Humidity: Adjustable up to 99% RH with a baseline selection of 30% to 95% RH.
• Humidity Speed & Accuracy: Drives from 40% to 85% RH within 10 minutes | Strict ±3% RH variance.
• Reservoir Volume: Integrated water chamber holding a minimum capacity of 1500 ml.
• Servo Oxygen Control: Closed-loop concentration management matching set points from 21% to 65% O2.
• Oxygen Precision: Display accuracy within ±2% of full scale with a 1% resolution baseline.
3. Monitoring, Patient Safety & Alarms
• Sensor Infrastructure: 7-sensor safety matrix assessing air, skin, rectal, mattress, heater, and ambient states.
• Dual Probe Tracking: 2-channel temperature probe monitoring neonatal core and peripheral temperatures.
• Apnea Wake-Up: Software-integrated patient stimulation protocol triggered by apnea detection.
• Hardware Safeguards: Independent thermocouples and mechanical overtemperature cut-off switches.
• Acoustics & Alarms: Over 30 distinct clinical alarms | Quiet hood operating under 45 dBA.
4. Hardware Ergonomics & UI
• System Display: 8.0-inch color LCD touch screen mapping trends, configurations, and parameters.
• Bed Positioning: Smooth, mechanically controlled external bed tilting adjustments.
• Access Portals: Acoustic-dampened silent doors to minimize neonatal stress.
5. Integrated Modules & Accessories
• Weight Scale: Built-in 300g to 8kg range scale with 1g resolution and ±5g accuracy tolerance.
• Pulse Oximetry: Integrated SpO2 module capturing peripheral blood oxygen saturation and pulse rates.
• X-Ray Tray: Dedicated cassette slot below the baby tray for undisturbed diagnostic imaging.
• Phototherapy Interface: Compatible with LED phototherapy units and adjustable-height exam lamps.
• Utility Hardware: Built-in dual IV poles and storage drawers integrated into the trolley chassis.
Transport Infant Incubator – NeoComfort NC10 Visor Healthcare
-
-
Technical data
-
- Power supply: AC110/220V 60/50Hz
- Power input: 450VA
- Operating condition:
-
- Environment temperature: 10°C ~ 30°C
- Environment relative humidity: 30% ~ 75%
- Environment air velocity of flow: < 1m/s
-
- Air temperature control range: 25°C ~ 37°C 37.1°C ~ 38°C
- Skin temperature control range: 32°C ~ 37°C 37.1°C ~ 37.5°C
- Air/Skin temperature sensor accuracy: ±0.3°C
- Temperature fluctuation: ±1°C
- Uniformity of mattress temperature: ≤1.5°C
- Air temperature deviation alarm: ±3°C
- Skin temperature deviation alarm: ±1°C
- Warm-up time: ≤20min
- Internal noise level: ≤55dB(A)
- Main battery: DC12V 40AH, Li-ion battery
- Charge time: 12hours
- Battery use time: 2hours
- Auxiliary battery: DC8.4V 0.17AH, Li-ion battery
- Mattress size: 63cm(L)*32cm(W)
- Trough capacity: 1200mL
- Air filter: 0.5μm
-
-
Vein Finder VX500 – MDX USA
Technical Specifications:
- Light Source: Near Infrared (NIR)
- Wave Length: 850nm
- Projector Resolution: 854 × 480 pixels
- Resolution Speed: 60 frames per second
- Resolution Deviation: ≤ 0.10mm
- Maximum Detection Depth: ≤ 8mm
- Best Projection Distance: 200 ± 20mm
- Minimum Identified Vessel Diameter: ≥ 0.4mm
- Main Unit Power Consumption: 50VA
- Power Adapter Input: 100～240V AC, 50/60HZ
- Power Adapter Output: 12V DC, 2.5A
- Internal Battery: 7.2V 2200mAh Lithium-ion battery.
- Battery Working Time: ≥ 2.5 hours continuous use.
- Sleeping Function: Automatic power-saving sleep state after 30 minutes of inactivity.
YP100 Infant Incubator I Baby Incubator
Ningbo David-YP100 Original Brand Baby Incubator
- Separate display Air mode control, set temperature and air temperature are displayed separately
- Humidity control Passive humidification
- Alarm indications Multiple failure alarm indications
- RS-232 connectorRS-232 connector for data output
- Low noise Low noise DC motor
Reviews
There are no reviews yet.