Vein Finder VX500 – MDX USA
Technical Specifications:
- Light Source: Near Infrared (NIR)
- Wave Length: 850nm
- Projector Resolution: 854 × 480 pixels
- Resolution Speed: 60 frames per second
- Resolution Deviation: ≤ 0.10mm
- Maximum Detection Depth: ≤ 8mm
- Best Projection Distance: 200 ± 20mm
- Minimum Identified Vessel Diameter: ≥ 0.4mm
- Main Unit Power Consumption: 50VA
- Power Adapter Input: 100～240V AC, 50/60HZ
- Power Adapter Output: 12V DC, 2.5A
- Internal Battery: 7.2V 2200mAh Lithium-ion battery.
- Battery Working Time: ≥ 2.5 hours continuous use.
- Sleeping Function: Automatic power-saving sleep state after 30 minutes of inactivity.
Related products
Blood & Fluid Warmer – Q Warm MDX USA
TECHNICAL SPECIFICATIONS
-
- Model: Q-Warm
- Temperature setting: 35°C- 42°C
- Power supply: a.c.100~240V/50~60Hz
- Power consumption: Max. 85VA
- Type of protection against electric shock: Class I
- Degree of protection against electric shock: BF Applied part; Defibrillation-protected
- Degree of protection against ingress of liquids: IPX2
- Temperature accuracy: ±2.0°C
- Overheat protection: 42°C
- Low temperature alarm: 37°C
- Warming up time: From 20°C to 42°C approx 2 min
- Operating mode: Continuous
- Dimension (W*D*H): 180x70x35mm
- Net Weight: 0.4kg
BP Holter Monitor Cardio Check – MDX USA
The CardioCheck enables doctors to gain a thorough diagnosis of patients over the course of 24 hours where blood pressure is recorded at set intervals according to the doctos requirements.
The CardioCheck is a handheld ambulatory blood pressure monitor which is based on the oscillography principle and records BP over 24 hours. It can be used in a clinical setting, hospital ward or even home us.
EBM-5 Electric Medical Bed
The EBM-5 is a high-end electric medical bed used in ICUs. It has five main functions, all controlled by a motor, allowing for adjustments to the backrest, leg rest, bed height, and specialized medical tilting positions for optimal patient care and recovery.
Key Functions & Specifications
The "5 functions" typically refer to the following motorized adjustments:
Backrest Lifting: Adjustable from 0° to approximately 70°–80°.
Knee/Leg Rest: Adjustable from 0° to approximately 30°–45°.
Height Adjustment: The entire bed can be raised or lowered (typically between 490mm and 790mm) to assist with patient transfers and caregiver ergonomics.
Trendelenburg Position: Tilts the bed so the feet are higher than the head (approx. 12°–15°).
Reverse Trendelenburg: Tilts the bed so the head is higher than the feet (approx. 12°–24°).
ECG Holter Monitor Cubix Holter – MDX USA
â– Quick and accurate analysis system.
â– With 3 leads synchro analysis, QRS search can be more exactly.
â– There are more than 10 templates as atrial premature beat module, ventricular premature beat module, long interval module, atrial flutter module, atrial fibrillation module etc. and multiplicate User-defined templates could almost identify every kind of pathologic waveforms.
â– Optional main channel.
â– Agile and exact "Atrial Fibrillation" analysis.
â– The function of pacing analysis could analyse all pacemakers.
â– Many pacine modules have been added.
â– Any period of single lead or 3-leads ECG can be reviewed at any time with the
function of fast waveform review and analysis.
â– The types of the analysis system of HR variability include five minutes of short
ECG and one hour or 24-hour of long ECG.
â– Print report expediently.
â– Perfect function of case management.
â– With the function of ST segment analysis and general load of the disorder of the heart muscle, the physician can judge a disease or disorder of the heart muscle generally.
â– "Sleep breath pause syndrome analysis", the physician could print sleep asphyxia
analysis report and diagnose.
â– "HRT" analysis, when the adjustable function is natural, this transitory change
will be represented by the form of HRT immediately.
â– 15."T Wave Alternation" analysis is a important index on judging and preventing arrhythmia.
Infusion Pump iFusion N7 – Visor Healthcare
-
- Screen: 4.3 inch LCD color touch screen
- Infusion Mode: ml/h (include Rate mode, Time mode), Body weight, Drip, Loading-dose, Ramp up/down, Sequence, Drug Library mode
- Accuracy: ±5%
- Flow Rate Range: 0.01-2000ml/h (increment 0.01ml/h)
- VTBI: 0-9999ml
- KVO: 0.01-5ml/h adjustable
- Bolus Rate: 0.1-2000ml/h(automatic & manual bolus available)
- Occlusion Level: 12 levels selectable
- Interface: USB Type-C
- Wireless: Wifi (optional)
- Alarm Type: VTBI Infused, Pressure high, Check upstream, Battery empty, KVO finished, Air bubble, VTBI near end, Battery near empty, Reminder alarm, No power supply, Drop sensor connection, System error, etc.
UPMed TEC350 Digital 3-Channel Touch Screen ECG Machine
Highlighted Core Features
Display Interface: Integrated 7-inch high-resolution color touchscreen that handles real-time configuration and system navigation.
Acquisition Protocol: Fully simultaneous 12-lead acquisition and display layout.
Intelligent Diagnostics: Built-in auto-analysis firmware providing automatic measurement data and diagnostic suggestions for routine parameters.
Storage Options: Supports external data expansion using standard USB flash drives or Micro SD storage cards.
Signal Processing Specifications
Input Circuitry: Floating circuit configuration with built-in hardware defibrillator protection to keep patients safe during multi-device use.
Frequency Response Range: 0.05 Hz to 150 Hz (-3dB) to filter subtle signal anomalies.
Time Constant Performance: ≥ 3.2 seconds.
Input Impedance Profile: High-sensitivity threshold at ≥ 50 MΩ (or up to 250 MΩ depending on internal version variants).
Input Circuit Current: Ultra-low leakage at < 0.05 μA.
Noise Threshold: Low ambient distortion level at < 5 μVp-p.
Baseline Management: Fully automatic anti-baseline drift correction algorithm.
Waveform & Output Parameter Controls
Recording Channel Layout: 3-channel simultaneous waveform printing via the integrated internal thermal printer assembly.
Manual/Auto Gain Sensitivity: Variable settings at 2.5 mm/mV, 5 mm/mV, 10 mm/mV, and 20 mm/mV.
Measurement Scale Range: ±5 mVpp maximum capacity.
Operational Modes: Toggle settings between automated processing or real-time continuous manual print overrides.
YP100 Infant Incubator I Baby Incubator
Ningbo David-YP100 Original Brand Baby Incubator
- Separate display Air mode control, set temperature and air temperature are displayed separately
- Humidity control Passive humidification
- Alarm indications Multiple failure alarm indications
- RS-232 connectorRS-232 connector for data output
- Low noise Low noise DC motor
Reviews
There are no reviews yet.